Langley Virginia Prototype Update Video

INFINITE GAIN VIDEO DEMONSTRATION This demo video shows the performance advantage of the Perepiteia REGENERATIVE ACCELERATION Technology vs a Conventional Generator. Conventional Generator Output = 0.0 Watts Perepiteia Regenerative Acceleration Output = 8.5 Watts Gain Percentage = Infinity THE GENERATOR INPUT (mechanical) DRIVE SHAFT POWER IS NOT THE SAME AS THE PRIME MOVER INPUT (electrical) POWER. POWER CONSUMED BY THE MOTOR IS A REFLECTION OF THE MOTOR’S EFFICIENCY AND HAS NOTHING TO DO WITH THE GENERATOR. THE MECHANICAL INPUT POWER TO THE GENERATOR IS ZERO IF THERE IS ZERO ROTATION OR SPEED AND ZERO WORK BEING PERFORMED BY THE GENERATOR. Generator Input Power = Drive shaft torque x speed x 2pi OF COURSE THE MOTOR IS WORKING HARD AT PROVIDING DRIVE SHAFT TORQUE AND COULD BE CONSUMING A MILLION WATTS BUT THE FACT REMAINS – A LOCKED DRIVESHAFT CANNOT PERFORM ANY WORK. INPUT POWER = 0 OUTPUT POWER = 0 I THINK YOU WOULD AGREE IF I WAS HOLDING THE DRIVESHAFT WITH MY HAND – YOU WOULD CLEARLY SEE THAT THERE IS NO MECHANICAL POWER (input) GOING TO THE GENERATOR AND THERFORE NO OUTPUT. INPUT = 0 OUTPUT = 0 THE MOTOR TORQUE IS MAXIMUM, BUT THE NET DRIVE SHAFT TORQUE = 0 AND NO ROTATION RESULTS . (which by the way is a steady state condition – Steady State condition: NET Torque must = 0). AT 3600 RPM THE MOTOR TORQUE IS MINIMUM, VIRTUALLY ZERO (BECAUSE MOTOR SLIP = 0 or very close to it), BUT NET DRIVE SHAFT TORQUE IS MAXIMUM (the new required torque is provided by the HV coils

Incoming search terms:

bokef

You may also like...