Experiments, inventions, patents, …
Here’s my “current” project: A small Tesla coil, with primary power from a Microwave Oven Transformer and a high-voltage Full Wave Bridge rectifier. I used a simple 2-element “blown” primary spark gap. In this…
#8 ~Russ’s Filament Extruder: Testing The Water Cooler. Works via Surface Tension (Hand Pulling) Ii will be making a puller for this… ( well I already did… Next video) Here the making of this…
The 15kV supply that I popped a couple days ago is now repaired. I first disconnected the HV section’s primary from the driver transistors, and powered it up by simply hooking the Interstate F43…
www.americanantigravity.com – Professor Pharis Williams discusses a novel fusion reactor capable of revolutionizing micro-nuclear power-generation. Ever wish that you had your own personal fusion energy reactor? Williams concept is aneutronic, making it safe, clean,…
Cooking my new line of research, dry crystal cell. It takes some time to prepare this one but the results are very promising. I will not say anything concrete but it does have some…
I dusted off the SassyClassE sstc for some experimentation, so I thought I’d do a “show and tell” of its components and operation. Erratum: It’s either efficient, or it’s not. At around 8 minutes…
I dusted off the SassyClassE sstc for some experimentation, so I thought I’d do a “show and tell” of its components and operation. Erratum: It’s either efficient, or it’s not. At around 8 minutes…
New coils are in! havent worked on resonance yet other than making L1 slightly lighter than L2… so that i should only need to work inwards on L2 ??:)
Make yourself a real laser out of scraps, junk, pennies and clothespins! Inspired by Nyle Steiner’s work at http://www.sparkbangbuzz.com/tealaser/tealaser7.htm Thanks, Nyle! I learned a lot from this project, and it works surprisingly well. WARNING:…
Correction: The CFL that I used was powered by 2 of those little rechargable battery banks wired in parallel not in series…so the ignition coil was receiving 14.4volts. I used a circuit with 2x2n3055…