Crystal Oscillator Tested At Sea

by · Published · Updated

This is a project that I wanted to test far away from the grid to make sure that it was not being influenced by local area signals or AC power sources. I am at an island located 30 miles out to sea where there is no grid power influence. This project worked exactly like it did ashore. The crystal oscillator is running at 13.56MHz.

Related posts:

  1. Slayer Exciter Goes To Sea Here is a simple Slayer Exciter led light project being...
  2. Cement battery running a Hartley Oscillator Transmitter.ASF This shows one of my cement batteries running a Hartley...
  3. One wire energy transmission—-using a crystal oscillator This is a simple 1 mHz crystal oscillator circuit configured...
  4. 13.56 MHz Crystal Oscillator wave form and frequency This shows the signal wave form and frequency of my...
  5. 13.56 MHz Crystal Oscillator –One wire experiment This is my 13.56 MHz crystal oscillator performing an old...
  6. Water electrolysis using a crystal oscillator at 13.56MHz This shows water electrolysis at 13.56 MHz using a crystal...
  7. Water electrolysis using a crystal oscillator at 13.56MHz This shows water electrolysis at 13.56 MHz using a crystal...
  8. 13 MHz Crystal Oscillator —Producing a sinewave signal at 13.5 MHz This shows the signal generated by my 13 MHz 4...
  9. Crystal Oscillator Exciter This is a 13.6829 MHz crystal oscillator configured to light...
  10. Crystal oscillator radio transmitter This is a simple AM radio transmitter that uses a...

You may also like...

Follow:

More