Experiments, inventions, patents, …
High freq driver temporarily down, so i wanted to try something that most people could do with a regular high voltage NST running on 60hz. So i , measured 121mH on the NST primary,…
hi all, doing some experimenting with what i said i was going to. a Dual Resonant setup, properly tuned together, i feel this was acheived here. Clearly at least could use full length ferrite…
turning up the input power a little here, and it killed a string of bulbs, so wanted to show you all before they all burned out 🙂 then show how it’s outputting some serious…
wanted to show you all something special, i went back to the center-tap, based on Dynatrons work, and used a Caduceus winding for L1. Due to the center being the negative now, L1 needed…
will do a vid with the welding rod core
Very pleased with the results here, i really didnt think the coupling would be good enough, however, the voltage is actually too high to allow much current at this frequency to light the 12v…
SYSTEM TURNED DOWN LOW, (which can be observed by comparing my last vid) –(wierd, No visible transmission on the second s-gap?) This vid demonstrates 1.5 Amp In, 10 Amps+ Out, plus measured the ground…
so lets say minimum the output is 48VDC x 20A (assuming correct) = 960wa​tts …Input is 110VAC x 2A = 220watts …960w / 220w = 4.36 ( 436 % efficient ) …BUT…if the voltage…
Resonance is a very real phoenomenon & is a huge part of Tesla-type inductor devices. Otherwise all you’re doing is brute forcing the electrons into oscillation, rather than using their natural frequency. Exactly like…