Voltage regulator oscillator by Jonnydavro.ASF
This is Jonny Davro’s “Voltage Regulator Oscillator”. It is a simple oscillator using a 3.3v voltage regulator and a coil. I show it here running one of my low voltage pulse motors.
Experiments, inventions, patents, …
This is Jonny Davro’s “Voltage Regulator Oscillator”. It is a simple oscillator using a 3.3v voltage regulator and a coil. I show it here running one of my low voltage pulse motors.
With each potentiometer tuned to each coil’s sweet spot and max voltage coming into the capacitor, I was unable to run the 18 volt drill (even with aid in starting). I then turned all…
Very interesting observation while playing with bemf pulse motors (the idea’s to make enough thrust from magnetic pulse motor powered by 1.5v bttry to spin light generator, making 0.01more watt of power than spent). So, as we can see the bemf creating …
More tests with bemf from setup similar to Adams motor with two Reed Switches as a breakers, bemf from coils getting back to bttry; this setup arranged more like an Ossie motor. Very economical run, running for days (6 already), but voltage is still de…
Just one transistor oscillation running light bulb from Tesla coil and another light from BEMF of primary coil. Instead of «ground» have used а heavy coil from other projeÑt. Seems bemf power is weaker, but more ” natural”, say able to run a motor…
Ooops. Don’t try this at home, folks! I popped something in my 15kV supply. After a day of troubleshooting, I think I’ve isolated the fault to the oscillator board’s PWM chip, a common SG2524,…
I installed a little ball valve and some better fittings in the vacuum line and vastly improved the tightness of the system. I can go for tens of minutes now with the pump off…
Here’s my “current” project: A small Tesla coil, with primary power from a Microwave Oven Transformer and a high-voltage Full Wave Bridge rectifier. I used a simple 2-element “blown” primary spark gap. In this…
Does the LS “Crossover” circuit charge its own battery? Well, you can see the voltage going up when I hook up the 1uF bypass cap, and that’s definitely not electrolytic bounce. After reading gadgetmall’s…
Here I show the simple DC Gate Threshold Voltage test for the IRFPG50 n-channel MOSFET. It is pretty easy to see that a voltage fluctuating around 4 volts on the gate is sufficient to…