inertial propulsion with gyroscope part 14
I decided to rebuild the flat Fiala mono gyro device with a better motor and a regulator for fine tuning. And i also decided to keep this one as a reference for future design and measurement. So this one will not be dismantled for other experiment and will be my
To be sure, i redo the suspended wheel test. The wheel hang on a monotoron (unidirectional ) kevlar thread (see part 6 for explanation) so no torque from unwinding effect at all.
First i pushed slightly the wheel in a backwards rotation, to see if the device can brake the counter rotation ,then stop and then go forwards, and then accelerates.
And it does
Hope this helps