Back EMF GAIN Transistor versus Switch
Copy of a video from youtube user: www.youtube.com user TheGuru2You gave me permission to post it on my channel. Please go to his channel for more on this video. Many thanks.
Experiments, inventions, patents, …
Copy of a video from youtube user: www.youtube.com user TheGuru2You gave me permission to post it on my channel. Please go to his channel for more on this video. Many thanks.
Very interesting observation while playing with bemf pulse motors (the idea’s to make enough thrust from magnetic pulse motor powered by 1.5v bttry to spin light generator, making 0.01more watt of power than spent). So, as we can see the bemf creating …
Stubblefield coil as a galvanic capacitor to power an Adams motor. No battery. Galvanic pair here is a steel bolt and copper tube with a cotton layer between. It runs as long as a cotton stays wet; if placed in the ground it can run till cotton gone, m…
Changed magnets on the rotor to radial to get rid of bearing bashing, rotor only has 4 magnets installed in the 8 slots, very suprised that the reed can go this high. Due to…
Optimised pulse motor with 4 coils, 8mags, 1 RS and 1.5v bttry running steady with 1.7v straight back emf and 50v on cap and with good torque. Say, if it’s consuming 3w of energy (1.5Vx2A, in fact it much less) the rotor can drive a tiny 6-12v generato…
Modified schematic to use bemf from both breakers (rs) to charge supercap connected in parallel to bttry. From 1.5bttry it runs for hours with little voltage drop (0.02v/24hrs); from 6v bttry it runs for days. Seems very economical setup, but, alas, no…
More tests with Ossie motor as a potential self-runner. Now it’s 8 mags 4 coils and 2 RS. Running not that fast as with small 4 mags rotor, I guess the rotor’s too heavy. Will see, so far 20hrs with .01v drop.
More tests with bemf from setup similar to Adams motor with two Reed Switches as a breakers, bemf from coils getting back to bttry; this setup arranged more like an Ossie motor. Very economical run, running for days (6 already), but voltage is still de…
Some more tests with BEMF. Playing with coils and transistors have made Bedidni SG running from 1.5v bttry. And seems it can run straight from bemf of RS bracker from Adams motor (bemf pulses charging 5V 1F supercap from which SG is running). No worrie…
Some more BEMF tests. Reed switch bracker and heavy wire coil making up to 150 volts impulses into the cap. Without cap its around 5-6v. So trying to send it back to bttry in different ways – straight to, and using second Pulse Coil setup shifted 45 de…