Here this is the closed loop test of the “Ossie motor” based on Ossie Callanan design. This is a high efficiency air core pulse motor which runs in closed loop and self-charge its own 1.2 V NiMh battery pack. The…
29 January 2010 at 09:15 · Comment
·
·
Some more tests with BEMF. Playing with coils and transistors have made Bedidni SG running from 1.5v bttry. And seems it can run straight from bemf of RS bracker from Adams motor (bemf pulses charging 5V 1F supercap from which SG is running). No worrie…
30 December 2009 at 02:40 · Comment
·
·
Some more BEMF tests. Reed switch bracker and heavy wire coil making up to 150 volts impulses into the cap. Without cap its around 5-6v. So trying to send it back to bttry in different ways – straight to, and using second Pulse Coil setup shifted 45 de…
25 December 2009 at 06:39 · Comment
·
·
Single coil reed switch Adams motor and bifilar coil transistor switch magnetic gyroscope powered by jt.
19 September 2009 at 19:12 · Comment
·
·
Have made the same setup as “zeropoint”‘s – 50/200 turns bifilar coil, reed switch for primary coil, LED for secondary as a diode and charging the same bttry, but instead of the ball just made some mags arranged in the rotor; working in the same way as…
7 September 2009 at 03:17 · Comment
·
·
A reversible permanent magnet is a magnet that can be turned on and off and can keep either state without external power. The video begins with the magnet in “on” mode, that is, it is holding the bar on the…
30 January 2009 at 06:24 · Comment
·
·
Simple charger powered by joule thief. Back emf bouncing in oscillator builds up enough voltage to charge 9V battery and lite bunch of LEDs or run a pulse motor.
25 January 2009 at 22:02 · Comment
·
·
Small pulse motor powered by joule thief. Back emf bouncing in oscillator builds up enough voltage to lite bunch of LEDs or run a pulse motor.
25 January 2009 at 08:10 · Comment
·
·
Playing around the Bedini pendulum, made one with the C-shape core and 7 wires coil (2 as a trigger coil, 4 as a power coil, 1 to led; all on the same core) and tried with different types of commutation (hall, reed switches, mechanical contacts). It ru…
12 June 2008 at 04:35 · Comment
·
·
Another setup for pulse motor – rotor with two magnets and stator of one coil winded by 7 wires (7-filar). 3 wires of coil connected to power source (6V bat) and 4 wires connected to pickup circuit (rectifier and cap). When it runs it work as a motor (…
21 May 2008 at 06:57 · Comment
·
·