PART 1 MIT TEST PROTOCOL RE INFINITE EFFICIENCY ReGenX GENERATOR & ReGen-X QUANTUM MOTOR PERFORMANCE

PART 1: MIT TEST PROTOCOL TO CONFIRM INFINITE EFFICIENCY ReGenX GENERATOR AND ReGen-X QUANTUM MOTOR PERFORMANCE AND CONFIRMATION OF THE LAW OF CREATION OF ENERGY.

Please find attached the MIT Test Performance Protocol which demonstrates Infinite Efficiency ReGenX Generator and ReGen-X Quantum Motor operation and confirmation of the Creation of Energy at the Sub-Atomic Quantum Electron level in all current bearing wires.

AND how and why all Conventional Electric Generators violate Newton’s 1st Law of Motion and the theory of conservation of energy and the Work-Energy Principle..

AND how and why all ReGenX Generators violate Lenz’s Law of Induction, Newton’s 1st Law, Newton’s 3rd Law, the theory of conservation of energy and the Work-Energy Principle.

DEFINITIONS:

1. Infinite Efficiency:

Infinite Efficiency Electricity Generation occurs when zero Mechanical Input Drive Shaft Power is required by the generator when the generator is delivering any magnitude of Electric Power to a load.

Infinite Efficiency Electric Motor Operation occurs when Mechanical Work is performed and zero Electric Input Energy is delivered to the motor.

2. Creation of Energy:

Electromagnetic Field Energy is created at the Sub-Atomic Quantum Electron level in every Current Bearing Wire when Electric Current flows in the wire.

The created Electromagnetic Field Energy performs all the Negative Work in all Conventional Electric Generators at infinite efficiency.

The created Electromagnetic Field Energy performs all the Positive Work in all ReGenX Electric Generators at infinite efficiency when the creation of the Energy is delayed in the Time Domain.

PROTOTYPE #1 CONCENTRIC E – CORE DATA SUMMARY:

Conventional Generator:

1) The Conventional Generator delivered 9.65 Watts to the load.

2) The created Electromagnetic Field Energy around the Conventional Generator Coil performed 28.4 Joules of Negative Work at infinite efficiency and it reduced the Kinetic Energy of the system by 28.4 Joules and the System Speed by 20 RPM.

3) The Prime Mover (Induction Motor) consumed an additional 20 Watts and delivered increased Torque and Power to the generator’s drive shaft.

4) The efficiency of the Conventional Generator’s electricity generation was less than 100%.

5) 28.4 Joules of Electromagnetic Field Energy was created which performed 28.4 Joules of Negative Work and a Kinetic Energy reduction of 28.4 Joules at infinite efficiency with zero externally supplied input energy..

6) ReGenX Generator Coil #1:

7) The ReGenX Generator Coil #1 delivered 11.02 Watts to the load.

8. The created Electromagnetic Field Energy around the ReGenX Generator Coil #1 performed 35.2 Joules of Positive Work and it increased the Kinetic Energy of the system by 35.2 Joules and the System Speed by 4 RPM.

9) Zero Mechanical Input Power was required by the ReGenX Generator and its efficiency was infinite.

10) 35.2 Joules of Electromagnetic Field Energy was created which performed 35.2 Joules of Positive Work and a Kinetic Energy increase of 35.2 Joules at infinite efficiency with zero externally supplied input energy.

ReGenX Generator Coil #1 &2:

11) ReGenX Generator Coil #1 and #2 delivered 11.14 Watts to the load.

12) The created Electromagnetic Field Energy around the ReGenX Generator Coil #1 and #2 performed 40.6 Joules of Positive Work and it increased the Kinetic Energy of the system by 40.6 Joules and the System Speed by 8 RPM.

13) Zero Mechanical Power was required by the ReGenX Generator and its efficiency was infinite.

14) 40.6 Joules of Electromagnetic Field Energy was created which performed 40.6 Joules of Positive Work and a Kinetic Energy increase of 40.6 Joules at infinite efficiency with zero externally supplied input energy.

ReGen-X Quantum Motor:

15) The ReGen-X Quantum Motor performed 31.3 Joules of Kinetic Energy increase (22 RPM) at Infinite Efficiency with zero externally supplied Input Energy.

16) 31.3 Joules of created Electromagnetic Field Energy was created which performed 31.3 Joules of Positive Work, which increased the Kinetic Energy of the system by 31.3 Joules at infinite efficiency.

MIT TABLE PROTOTYPE 1 – HEINS DEFINITIVE DATA

ENERGY IS THE “CURRENCY” WHICH IS REQUIRED IN ORDER TO DO PERFORM POSITIVE OR NEGATIVE WORK.

IN ORDER TO DO 100 JOULES OF NEGATIVE OR POSITIVE WORK YOU MUST EXPEND 100 JOULES OF ENERGY.

THE NEGATIVE WORK PERFORMED BY ALL CONVENTIONAL ELECTRIC GENERATORS IS PERFORMED WITH INTERNALLY CREATED ELECTROMAGNETIC FIELD ENERGY AT INFINITE EFFICIENCY BUT NO ENERGY IS CONSUMED, USED, TRANSFERRED OR CONVERTED IN THE PROCESS.

THE POSITIVE WORK PERFORMED BY ALL ReGenX ELECTRIC GENERATORS AND ReGen-X QUANTUM MOTORS IS PERFORMED WITH INTERNALLY CREATED ELECTROMAGNETIC FIELD ENERGY AT INFINITE EFFICIENCY BUT NO ENERGY IS CONSUMED, USED, TRANSFERRED OR CONVERTED IN THE PROCESS.

You may also like...