inertial propulsion with gyroscope part 14

I decided to rebuild the flat Fiala mono gyro device with a better motor and a regulator for fine tuning. And i also decided to keep this one as a reference for future design and measurement. So this one will not be dismantled for other experiment and will be my
SCALE.

To be sure, i redo the suspended wheel test. The wheel hang on a monotoron (unidirectional ) kevlar thread (see part 6 for explanation) so no torque from unwinding effect at all.

First i pushed slightly the wheel in a backwards rotation, to see if the device can brake the counter rotation ,then stop and then go forwards, and then accelerates.

And it does

Hope this helps

Laurent

You may also like...