Extreme High Voltage: Supplement: TKWinder Level Wind Mechanism

by · Published · Updated

I got the level wind drive installed. Had to make some ersatz pulleys out of scraps and o-rings. The drive ratio is still slightly off, I need a tiny bit bigger pulley on the 28-pitch lead screw to match the 0.015 wire diameter. I think a layer or two of tape should be enough.

Related posts:

  1. Extreme High Voltage: Supplement: Basic Coil Winder I’ve been collecting parts, bits and pieces for years, and...
  2. Extreme High Voltage: Supplement: Vacuuming a Coil under Mineral Oil Here I’m trying my version of MakerJ’s home-built HV transformer...
  3. Extreme High Voltage: AnAtmoSphere: Cathode Central Sphere Solar Electrode The central spherical electrode is connected to the negative output...
  4. Extreme High Voltage: TinselKoil4 PsarkShow 2b A slideshow of some individual frames from the video, showing...
  5. Extreme High Voltage: Water Drop Triggered Arc Gap Vaporization Experiment Setup I’m experimenting with using water drops to trigger the arc-spark...
  6. Extreme High Voltage: Supplement: TinselKoil VII SparkGap Tuning New spark gap rebuild, with 5 sparking spaces. First light...
  7. Extreme High Voltage: Supplement: TinselKoil VII SparkGap Tuning New spark gap rebuild, with 5 sparking spaces. First light...
  8. Extreme High Voltage: Supplement: TinselKoil4 Making Moar Psarks More psarks, annoying the neighbors and frightening the dogs. See...
  9. Extreme High Voltage: Supplement: AnAtmoSphere Low Pressure Chamber First Evac A friend gave me a nice glass sphere, designed as...
  10. Extreme High Voltage: MagLevES Motor v2.0 with Arduino Tachometer I rebuilt the base and electrode mounts of the maglev...

You may also like...

Follow:

More