Maxi energy pumping with mini kacher 1 .wmv
Hi all special thank’s to “Lenz ” Mr Clean and other contributors, because all your experiments are of great inspiration, and each tiny input adds to other input and create a chain of ideas. And here my contribution so far After having tested the long coil for my Slayer exiter, (just big thank’s to Slayer ), i tested the Delamorto kacher and also the Dragon’S (/Lenz/Znel /windfilter) flat Kacher, i decided to test a very small kacher , about 10 cm length and 20 mm diameter, the secondary is 0.3 mm enameled copper wire, probably 280 turns = 8.4 cm lenght on a 20mm diameter plastic tubing. Than the primary would be tested with all kind of coil from 3 to 4 turns ,flat pancake in 1.5 insulated plain copper wire to 2 to 4 turns Caduceus coil. My best results so far is to put the primary in caduceus coil right in the middle of the secondary. But all of this is in working procedure.So please do not ask me to much detailss for the moment. But what puzzled me at the present , is that on the output , i can light a incandescent lamp, or get some interesting sparking , or simply short, and the input power is almost not influenced . Of course the input power is there, and i can smell the transistor heating, so the input power serves the fonctioning of the kacher. So is this input power stable and serves only to the opening and closing of the door, accross which the other waiting energy is rushing , with all freedom ??? Ok enough for tonight Good luck at all Laurent
