Pyraflux – wireless electricity with flux capacitor
A micro Tesla tower, with 2 pyramid shaped interlocking primary coils and a flux capacitor negative induction section. Here’s the website link for the flux capacitor principle: 4gang.wordpress.com The circuit is a Slayer exciter (see GBluer’s channel for circuit), with A1020 PNP transistor at 7.5V from a standard 3V-12V wall adapter. Capacitor rating is 1kV 103Z The Windsor tower can be seen in more of my videos on my channel. It’s made from a Walgreen pill bottle, wound with 8 sections from stators of 3x Mabuchi DC motors. The flux capacitor is comprised of 2 identical choke sides, with capacitor at the center as a tap. It runs from the Collector of the transistor, to the top of the twin Bashar/Russell pyramid coils. The output leg of the capacitor itself runs to the bottom of the lower coil. See morpher44’s channel for more info on the Bashar antenna/transmitter. More about Walter Russell and his coils here: www.rexresearch.com The pyramid coils seemed to be less powerful in experiments than other ideas, then jumped in performance by around 1/3rd when the flux capacitor section was introduced. Output now is similar to a 2 wind internal or external primary of the same gauge wire – as seen chiefly in the neon or ‘Space Shuttle’ plasma sections of the video.. Whether a real phenomenon or not, the very placement of the capacitor stage within the flux generating Primary coil circuit gives it the name. It certainly isn’t harming anything ! Music: Aphrodite – Twilight