Free Energy News » motor

bemf “quest for OU”VII

F.E.N. — Wed, 28 Jul 2010 05:33:29 +0000

Very interesting observation while playing with bemf pulse motors (the idea’s to make enough thrust from magnetic pulse motor powered by 1.5v bttry to spin light generator, making 0.01more watt of power than spent). So, as we can see the bemf creating pretty big voltage on 1.02v bttry, and even more interesting that the voltmeter showing voltage even with one lead…

Dr. Stiffler SEC Exciter Hydrogen production via diode

F.E.N. — Wed, 23 Jun 2010 23:56:12 +0000

www.overunity.com Dr. Stifffler experiment with a SEC exciter circuit running from a 12 Volts battery to generate Hydrogen via a normal 1N4148 diode in destilled water. Very scalable and thus input power independant.

Adams Motor – “Stubblefield”

F.E.N. — Tue, 01 Jun 2010 06:06:22 +0000

Stubblefield coil as a galvanic capacitor to power an Adams motor. No battery. Galvanic pair here is a steel bolt and copper tube with a cotton layer between. It runs as long as a cotton stays wet; if placed in the ground it can run till cotton gone, months, years. Secondary coil lights a LED ’cause the primary field collapses. But a real genius of Natan Stubblefield is a wireless power transmission through the ground.

Probably a scam : Muammer Yildiz magnet motor presentation at Eindhoven TUe in 2009

F.E.N. — Mon, 26 Apr 2010 23:28:00 +0000

www.overunity.com Probably hidden batteries are used: This was already taking place on 27th of April 2009 at the TUe in Eindhoven. Muammer Yildiz presented his magnetic motor together with JL Duarte but until now nobody posted videos or pictures about this event. Yildiz is search via a penelty order in Germany. www.overunity.com

watermotor modifications to get it to run with HHO-air mix

F.E.N. — Sun, 25 Apr 2010 19:56:06 +0000

www.overunity.com This is the presentation about the modification of the Anton cell team what they do to modify the standard chinese motor-generator to run on an hho-air mix. The whole project is open source technology ! Enjoy ! Many thanks to Oliver and Valentin to make this possible ! Great work guys ! Regards, Stefan. www.overunity.com

Probably a scam : Muammer Yildiz Magnet Motor delft university

F.E.N. — Wed, 21 Apr 2010 23:50:29 +0000

www.overunity.com Probably a scam : Muammer Yildiz Magnet Motor presentation at the delft university in the netherlands Probably hidden batteries are used. www.overunity.com

Holy Grail “Tiny Orbo Replication 4″

F.E.N. — Fri, 16 Apr 2010 16:19:45 +0000

Input: ~ 180 mW total. 170 mW of that 180 mW is joule heating from electrical wire resistance, thus leaving 10 mW for the motor. Output: ~ 280 mW from one pick up coil. Also, Ive taken a guesstimate that the heat produced by this motor due to bearing and air drag is ~~ 2 watts. For part #’s & build instructions: globalfreeenergy.info The motor mounting is incomplete, so don’t build the mount as shown in the video. Both ends of the metal rod need to be mounted, otherwise there will be axial forces on the bearing. I’ll update the video when it’s all 100% complete. Contact me for details. The rpm was 17100.

Tiny Orbo Replication 3

F.E.N. — Sun, 28 Mar 2010 07:19:01 +0000

This is the “Tiny Orbo Replication” ver.3. Ver.1 was tested at far above 100% efficiency. See globalfreeenergy.info Ver.3 is not complete yet. Only 1 toroid. Needs 16 toroids. Everything is taped down for now. It’s still under construction. Input power is ~ 0.12 watts. Nearly 100% is joule heating (wasted heat), & does not go to powering the motor. Max rpm was 13500, where the motor was still rapidly accelerating, but something went wrong. It began to rapidly decelerate. Decades of experience tells me without any doubt this motor is far beyond 100% efficiency. Congratulations Sean & Steorn! In this video you’ll see the motor run, but first some footage while it was being made. Warning, it’s loud. I have no idea why. The bearing is a good new ceramic bearing. The meter shows frequency, not rpm.Multiply it by 7.5 to get rpm. 1.4KHz = 10500 rpm. This toroid is very special. It’s Metglas MAGAMP, perm=1 million, but the large plastic case was removed. Core was then Epoxied. After the core was wound, the perm changed to nearly an air core caused by pressure, which is a well known effect. This effect seems to greatly amplify the excess energy effect, turning the motor into a monster. Even though the perm nearly = a vacuum, the toroids work great for this design. Sean, you did it brother!!! I am not affiliated with Steorn. Orbo is trademarked by Steorn, steorn.com. You can find daily blogs about my replication progress at http

Magnet Motor Switch Secondary Coil Test

F.E.N. — Fri, 26 Mar 2010 14:52:00 +0000

Testing a short length of wire as a secondary. Next step is to put on a full size secondary coil.

bemf “fun with fans”

F.E.N. — Sat, 20 Mar 2010 05:47:51 +0000

Using the same Bedini schematic similar to “magnet spiner” www.youtube.com and inspired by Imhoter made two fun-motors, running from 6v bttry. First one does not charge the same bttry but charging the cap from which second motor’s running, charging it’s own capacitor.