Steorn Orbo Rep. 6 New Trigger.
When the Buz 71 goes ON. The volt over D — S is only 0,05 volt. A transistor has about 1,5 volt and 2 transistors have 3 volt. This give 3 volt losses to…
Experiments, inventions, patents, …
When the Buz 71 goes ON. The volt over D — S is only 0,05 volt. A transistor has about 1,5 volt and 2 transistors have 3 volt. This give 3 volt losses to…
This is Jonnydavro’s pan oscillator running a standard 110v /20 LED candelabra bulb. In this video I am using a 12 volt battery with a rheostat to control the power. Two small transistors are…
A Peltier element delivers a small voltage up to 2 volts, when it is cooled on one side and heated on the other. Heat from my hand gives only 0.1 to 0.2 volts. I…
Now the motor can run from 330 – 1000 Rpm. on the 9,1 volt trigger coil supply and without the big cap. on 22000 yF. But only when I use a 1,25 volt 10000…
This is a simple traditional Tesla Coil using a 3 volt electronic bug zapper and a few other easy to make parts. There are several other videos here on Youtube on how to build…
This is an air battery test experiment I have had running for the last few weeks. The outer masking tape is just to hold the magnesium ribbon in place. The battery works fine without…
This Joule Thief work at a very very low input voltage from 0.125 to 0.35 volts and the output voltage is 2.7 volts, to the LED. An ordinary Joule Thief work down to 0.6…
With Jonnydavro’s help I was able to get the amp draw way down and sitll run this on 2.5 volts. I also stabilized the spinning magnet so it runs smoother now.
This “FIRST TIME” experiment was to determine the level of High Frequency output from the cold spiked power of a Quanta Radiant Energy Generator input source driven by a Li-ion Polymer battery.
http://www.overunity.com/13731/how-to-convert-a-lead-acid-car-battery-to-an-alum-battery-part-1-to-7/ In this video I am showing a 12 Volts 35 Watts halogen bulb connected to the ALUM car battery as the load. I am showing the voltage at the battery and the current…