Steorn Orbo Rep. V3. Overunity ? 0,0009 Watt
Is this displayed motor a real Orbo motor ?? The yellow current curve is completely flat on the top, as Sean said it should be.There is no back emf. The toroid core is a…
Experiments, inventions, patents, …
Is this displayed motor a real Orbo motor ?? The yellow current curve is completely flat on the top, as Sean said it should be.There is no back emf. The toroid core is a…
Now the motor can run from 330 – 1000 Rpm. on the 9,1 volt trigger coil supply and without the big cap. on 22000 yF. But only when I use a 1,25 volt 10000…
Overunity proving: Input power without load. 4 volt * 31mA = 0.124 watt. All the power is heat losses. Input power with load. 4 volt * 32 mA = 0128 watt. Input power increase…
When the Buz 71 goes ON. The volt over D — S is only 0,05 volt. A transistor has about 1,5 volt and 2 transistors have 3 volt. This give 3 volt losses to…
www.overunity.com See, what 6 Liters per Minute HHO gas can do to a motor-generator adapted to HHO gas ! It can generate more than 1000 Watts of electricity via this combination. The loads are a 300 Watts another 500 Watts incandescent light and a dril…
fried both my 1000 volt multimeters, replaced the fuses…& they still dont work… 😀 im lovin it It is very hard to tune, i’ll need to make the coils closer in diameter …i’ll make…
www.overunity.de English translation see below ! Eine Anton HHO Zelle in der roten Kiste wird mit 2849 Watt betrieben aus dem Stromnetz. Hier wird jetzt mit einer Platikflasche, die durcj den Auftrieb des Gases…
This is Jonnydavro’s pan oscillator running a standard 110v /20 LED candelabra bulb. In this video I am using a 12 volt battery with a rheostat to control the power. Two small transistors are…
A Peltier element delivers a small voltage up to 2 volts, when it is cooled on one side and heated on the other. Heat from my hand gives only 0.1 to 0.2 volts. I…
Experimenting with a PVM500 Resonant Plasma driver for primary 20-70khz for stepping down the other coils. This setup running at 31 khz, 30v AC, 100mA (3watts), and is lighting a 12v 20 watt halogen…